Potentiostat
User Manual
Ossila.com
11
Ossila Limited © 2020
Figure 7.4.
Ossila Cyclic Voltammetry PC software.
8.
Installation
1.
Install the Ossila Cyclic Voltammetry software on your PC.
I.
Run the file ‘Ossila
-Cyclic-Voltammetry-Installer-vX-X-X-
X.exe’ on the USB memory
stick provided.
II.
Follow the on-screen instructions to install the software.
2.
Install the USB drivers on your PC.
I.
On the USB memory stick provided, open the ‘SMU
-
Driver’ folder and run either
‘Windows 32
-
bit SMU Driver’ for 32
-
bit operating systems or ‘Windows 64
-bit SMU
Driver’ for 64
-bit operating systems.
II.
Note, on Windows 10 the drivers will install automatically when the unit is
connected.
III.
If the drivers fail to install, please refer to the SMU USB Driver Installation Guide
found on the USB memory stick.
3.
Connect the 24 V / 2 A DC power adaptor to the power socket on the rear of the unit.
4.
Connect the unit to your PC using the provided USB-B cable.
I.
If you are using a USB connection and the unit is not detected, please refer to the
SMU USB Driver Installation Guide found on the USB memory stick.
Note:
The Ossila Cyclic Voltammetry software and SMU USB drivers can also be
https://www.ossila.com/pages/software-drivers.
9.
Operation
9.1
Taking a Measurement
1.
Add your appropriate electrolyte solution into the electrochemical cell.
2.
Place the lid on the cell and insert the working, counter, and reference electrodes.
