General
_________________________________________________________________________________
OSRAM operating instructions DALI Repeater LI
page 2
Contents
General
Installation
Operation
Appendix
Application and function ............................................................................................... 2
Safety information ........................................................................................................ 2
Design and dimensions ................................................................................................ 3
Wiring schemes............................................................................................................ 3
DALI operation with supervisory control unit ................................................................ 5
Touch DIM
operation.................................................................................................... 5
Functional test .............................................................................................................. 6
Service button .............................................................................................................. 6
Indication LED .............................................................................................................. 7
Accessories (not included) ........................................................................................... 8
Technical data .............................................................................................................. 8
Application and function
The DALI REPEATER LI allows to built up DALI systems with more than 64 ECG per DALI line. For
the supervisory control unit it acts like a single ECG. On the other hand it is able to control up to
64 DALI ECG. All ECG connected to the DALI REPEATER LI are set to the same dimming level.
Switching state, dimming level and lamp failures can be queried via the Repeater. At the same time it
allows the extension of the DALI line by 300 m each time.
If the Repeater is used in Touch DIM operation, up to 64 DALI ballasts can be controlled by means of
a common push button. The DALI REPEATER LI is designed for luminaire integration. With the
LMS CI BOX an independent mounting, e.g. for recessed ceiling installation, is suitable.
Safety information
The following information is provided for your safety:
•
Please read these operating instructions carefully before installing and using the DALI
REPEATER LI. This is the only way to ensure that you use the equipment safely and
correctly. Keep these operating instructions in a safe place for future reference. You should
make sure that everyone who uses DALI REPEATER LI has read these operating
instructions.
•
DALI REPEATER LI may only be installed by qualified personnel who have been
appropriately trained and who have the relevant authority. The installation personnel must
be familiar with the operating instructions. Power must be switched off before any work is
undertaken on the unit.
•
The DALI REPEATER LI is especially designed for installation within luminaries, an
independent installation is only allowed in combination with the mounting kit LMS CI BOX.
•
The relevant safety and accident prevention regulations must be observed.
•
The Touch DIM operation must not be used in parallel to operation with a DALI control unit.
Only DALI or Touch DIM operation is allowed.
•
The external switch for the Touch DIM operation must be designed for mains voltages.
•
If the DALI output is wired with external voltage, particularly with a mains voltag, the unit
may be destroyed.
