Page 8
Installation and operating instructions: Blind Control Unit DALI BC ADVANCED RI
Fig.
G
- This radio system may only be connected to other communication networks if this does not infringe
the relevant national laws.
- This radio system may not be used for communicating beyond property boundaries.
- If used as specified, this device complies with the requirements of the R&TTE directive (1999/5/EU).
A complete conformity declaration can be found on the internet at: www.osram.de
The louvre blind actuator may be operated in all EU and EFTA states.
8.
Technical data
Rated voltage:
AC 230 V AC, 50/60 Hz (N conductor required)
Circuit breaker:
10 A
Switching output:
max. 1 motor 700 VA
Relay output:
2 make contacts (with potential and interlocked)
Changeover time for change of direction: approx. 1 second
Continuous operation:
approx. 2 min.
Receiving frequency:
433.42 MHz, ASK
Type of protection:
IP 20
Dimensions (
∅
x H):
52 x 23 mm
Central hole
∅
: 7.5
mm
Temperature range:
approx. -20 °C to +55 °C
Relative humidity:
0 % to 65 %
D
igital
A
ddressable
L
ighting
I
nterface
The international digital interface standard for the lighting industry
Date 13.09.02 / Louvre Blind Module ADVANCED Version 1.0
Subject to change without notice. Errors and omission excepted.
