Osram CJ3000, Информация пользователя

Страница: 3 / 24

3
XTYLOS
Do not stare at the operating light source
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 225 m is
not expected.
Do not operate without complete light source enclosure in place or when lenses are damaged. Lenses and housing
must be mounted and, if visibly damaged, they have to be replaced with genuine spares to avoid exposure to
potentially hazardous internal laser light levels.
Caution, risk of electric shock
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
similar qualified person.
Connection to mains supply
Connection to the electricity mains must be carried out by a qualified electrical installer. Check that the mains
frequency and voltage correspond to those for which the luminaire is designed as given on the electrical data label.
This label also gives the input power to which you need to refer to evaluate the maximum number of fittings to
connect to the electricity line, in order to avoid overloading.
IMPORTANT : if the luminaire is used in residential environment, in some case might be necessary to adopt
appropriate measures to avoid EMI disturbances to broadcast receiver equipment.
Protection against electrical shock
Connection must be made to a power supply system fitted with efficient earthing (Class I appliance according to
standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the luminaires from indirect
contact and/ or shorting to earth by using appropriately sized residual current devices.
Maximum ambient temperature
Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C (104° F).
Temperature of the external surface
The maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state, is
60°C (140°F).
IP20 protection rating
The fitting is protected against penetration by solid bodies of over 12mm (0.47”) in diameter (first digit 2), but not
against dripping water, rain, splashes or jets of water (second digit 0).
Minimum distance of illuminated objects
The luminaire needs to be positioned so that the objects hit by the light beam are at least 10 meters (32’10”) from the lens
of the luminaire. For personnel exposure distances, refer to Hazard Distances declared above.
Minimum distance from flammable materials
The luminaire must be positioned so that any flammable materials are at least 0.2 meters (8”) from every point on
the surface of the luminaire.
Light collimation system
This product contains internal light collimation system. Avoid intense light from any angle.
This product is intended for the following areas of application:
studios, stages, theatres, exhibitions, trade fairs, events, theme parks, entertainment venues, architectural lighting
and similar.
Not suitable for household illumination
Not for residential use
Battery
This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end
of its life according to the regulation in force.
Disposing
This product is supplied in compliance with European Directive 2012/19/EU - Waste Electrical and Electronic
Equipment (WEEE). To preserve the environment please dispose/recycle this product at the end of its life according
to the local regulation.
The products to which this manual refers comply with the European Directives pursuant to:
• 2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD)
• 2014/30/EU - Electromagnetic Compatibility (EMC)
• 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS)
• 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP)
t
a
40°C
t
c
60°C
IP20
10