Osram AS7056, Быстрый старт

Страница: 6 / 26

6
Setup
Getting Started
1. Connect the micro USB to USB cable to the board and plug it
into your computer.
2. Afterwards, press the S1 button for 1 sec to turn on the sensor
board.
3. The green LED on the Bluetooth Microcontroller module and
USB connector board will light up as soon as the board is
powered.
4. The green LED (H1) on the mainboard will light up as soon as
the board is powered.
5. Start the EVK GUI software.
Fig. 5: AS7056 Evaluation Kit power ON
AS705x EVK Mainboard On/Off Button (S1)
ON: Press the button for 1 Sec
OFF: Press the button for 2 sec