LEXPERT EMPHASY
10
LED
Press the MENU button up until the
information is displayed on the screen. Press the ENTER button and the display will blink. Use the DOWN
and UP buttons to select
(On)
or
(Off)
, Once the mode has been selected, press the ENTER button to setup, to go back to the
functions without any change press the MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the menu
mode.
Display Inversion
Press the MENU button up until the
information is displayed on the screen. Press the ENTER button to setup, to go back to the functions wi-
thout any change press the MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the menu mode.
Manual Mode
Press the MENU button up until the
information is displayed on the screen. Press the ENTER button and the display will blink. Use the DOWN
and UP buttons to select
(dimmer), Once the mode has been selected, press the ENTER button to setup the value from 0 to 255, to go back
to the functions without any change press the MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the
menu mode.
Auto Test
Press the MENU button up until the
information is displayed on the screen. Press the ENTER button and the unit will run the built-in program-
mer for self-test. To go back to the functions press the MENU button.
Fixture Hours
Press the MENU button up until the
information is displayed on the screen. Press the ENTER button and the display will show the temperature
of the unit. To go back to the functions press the MENU button.
Software version
Press the MENU button up until the
information is displayed on the screen. Press the ENTER button and the display will show the version
of software of the unit. To go back to the functions press the MENU button.
