Page
43
of
59
If necessary, click on the “Stop” button
.
Select the “Output” ribbon.
Set
“Output
Transport
” to “
UDP.
You can
set the “Dest Address” to:
(a) the IP address of the decoder or decoding PC. (in the pictured example, 192.168.0.6)
(b) or to a multicast address (An example multicast address would be “225.1.2.3”. If you are on a
shared network, check with your Network Administrator.)
Make note of the value of “Dest Port” (This will be “8600” by default).
AUDIO NOTE: When selecting audio channels, HDMI and SDI each support 4 stereo pairs for audio.
When streaming with UDP, users can stream up to four pairs simultaneously.
Содержание Talon PRO
