![Ositech comm 28800 Скачать руководство пользователя страница 47](http://html1.mh-extra.com/html/ositech-comm/28800/28800_users-manual-and-reference_1655820047.webp)
User’s Guide and Reference
4 - 15
Modem Command Reference
Examples
ATSn
Establishes S-register
n as the default register
ATSn=x
Set S-register
n to the value x
ATSn?
Reports the value of S-register
n
T — Set Tone Dial as Default
Parameters:
none
Default:
none
Causes the modem to assume that all subsequent dial commands are
tone dialled. The user may omit the “T” from the dial string.
Vn — Result Code Form
Parameters
0 or 1
Default
1
Selects whether the modem returns long form or short form result codes.
All responses are ASCII values. Long-form (verbose) responses are
preceded and terminated with both carriage return and line feed control
characters. Short-form (numeric) responses are only terminated with a
carriage return control character (see Xn command).
Examples
ATV0
Allows short-form (numeric) result codes to be sent.
ATV1
Allows long-form (verbose) result codes to be sent.
Wn — Connect Message Control
Parameters
0, 1, or 2
Default
0
This command controls which message(s) are reported upon connection.
These messages can also be reported in either numeric or verbose form.
For example, both 77 and PROTOCOL:LAP-M indicates that the error-
correction protocol is LAP-M. (See Xn command.)
Examples
ATW0
Upon connection report CONNECT XXXX only
ATW1
Upon connection report CARRIER XXXX,
PROTOCOL XXXX and CONNECT XXXX
ATW2
Upon connection report CONNECT XXXX only
Содержание 28800
Страница 1: ...Trumpcard Data Fax Modem User s Guide and Reference...
Страница 10: ...x...
Страница 32: ...4 12 Trumpcard 14400 28800 Modem Section Four...