OSIO OST-2670D, Инструкция по эксплуатации

Страница: 43 / 45

20
- You can press [fast forward]/[fast back] to move in the current recording.
Press [Stop] bu
tt on to end the ti meshi ft , and it will back to the normal playing of the program
Problem Poten ti al Reasons What to do
No picture
Power isn’t connected Connect the power
The power switch is not on Switch on the power
Screen shows
“No Signal”
DVB-T or DVB-T2 cable not
connected
Plug in the DVB-T or DVB-T2 cable
Aerial cable is faulty Check aerial cable and connec ti ons
No sound from
speaker
No or incorrect connec ti on
with audio cable
Connect the audio cable correctly
Sound on mute Turn o ff mute func ti on
Only sound, no image
on the screen
No or incorrect connec ti on
with AV cable
Make sure cables are connected
correctly
The program is a radio
program Press <TV/RADIO> key to shi ft into
TV mode
Remote Control is not
responding
The ba tt ery is exhausted Change ba tt ery
Remote Control is not facing
or close enough to the Set
Top Box
Adjust the posi ti on of the Remote
Control and move closer to the unit
Picture is breaking up The signal is too weak Check aerial cable and connec ti ons
Troubleshoo ting
When you are playing the program, you can insert the USB, and at any ti me you can press the [Time
shi ft ] bu tt on, the frame will be paused, and you may press the [PLAY] bu tt on a ft er a second, it will start
to ti meshi ft now. Press [Info] key to see ti me shi ft informa ti on as below: