P/N 101023281
Metor 900M
Page
19
Rev. 0.5
Installation and Operating Manual
Rapiscan Systems Proprietary Information
4
STARTUP AND SHUTDOWN
•
Metor 900M is turned on and off from
the power switch on the main
electronics inside the cross piece.
•
To access the switch open the cross
piece hatch with the key provided.
•
The unit can be switched to standby
without the need to open the cross
piece hatch by enabling the standby
feature from the user interface.
Standby state is turned on and off
from keypad on the cross piece.
During standby all displays and lights
are off and metal detection is
disabled with magnetic field
generation turned off.
•
After switching on Metor 900M runs a
self-test sequence before normal
operation starts.
NOTICE
In permanent outdoor installations it is recommended to use standby feature to turn
power off instead of using on/off switch. Standby power keeps temperature inside
cross piece above ambient and thus prevents possible moisture condensation inside
the cross piece due to thermal cycling effects.
