Page 26
Metor 900M
P/N 101023281
Installation and Operating Manual
Rev. 0.5
Rapiscan Systems Proprietary Information
6.7 Audio/Visual Menu
Item
Possible
values
Default
setting
Description
ALARM VOLUME 0 - 9
5
Selection of audible alarm volume.
When value is 0 alarm is muted.
Volume cannot be less than value set by ALARM VOL
MIN parameter.
Note that volume can also be adjusted directly using
<speaker> key without entering user interface.
ALARM VOL MIN 0 - 9
2
The minimum value to which audible alarm volume can
be adjusted.
ALARM TONE
1 - 5
2
Selection of audible alarm tone.
KEYPAD BEEP
YES/NO
YES
Selection whether a beep is made when a keypad
button is pressed.
AUDIO ALARM
TIME
0.4
– 6.0 s
2.0 s
Selection of the time audible alarm is on.
VISUAL ALARM
TIME
0.4
– 6.0 s
2.0 s
Selection of the time visual alarm is on.
Note that VISUAL ALARM TIME cannot be shorter than
AUDIO ALARM TIME.
DISPLAY
SIGNAL
COUNTERS
PARAMS
BLANK
SIGNAL
Selection of what is shown on display.
SIGNAL: signal size is shown.
COUNTERS: passenger and alarm counter values are
shown.
PARAMS: sensitivity value and detection program are
shown.
BLANK: display is blank.
ZONE DISPLAY
EXIT
ENTRY
BOTH
OFF
EXIT
Selection of the side(s) on which zone displays are
operational.
ENTRY and EXIT sides are defined by PAX
DIRECTION parameter.
ZONE 2D
YES/NO
YES
YES: zone displays show in addition to vertical
information and the side of the alarming items. If
alarming item is passing through the center of the unit
both zone displays are lit.
NO: zone displays on both panels show the same
information of the height(s) of alarming (items).
TRAFFIC
LIGHTS
ENTRY
EXIT
BOTH
OFF
ENTRY
Selection of the side(s) on which traffic lights are
operational.
ENTRY and EXIT sides are defined by PAX
DIRECTION parameter.
