Installation and operating manual for WATERFRIEND exclusive MRD-2 Page 38 (44)
5. Scroll down 3 pages by pressing the button
6. You can now assign new values to each PIN
Make sure you make a note of the PINs!
Naming the unit
Entering an e-mail address
In order to be able to identify different control units during online access, each osf device has a facility for
assigning a name.
The MRD-2 is able to send any fault indicator messages via e-mail. The control unit must be connected to the
Internet for this feature to work. You enter the relevant e-mail addresses (2 maximum) via the WEB interface of
the communication server.
Entering an e-mail address
Assigning a name
1. Log in as usual to the communication server
2. Then log in with the Service PIN
3.
In the Home page, press the “
menu
” button
4. In the main menu, press the
„Service“ button
5. You can enter the name of the unit and the e-mail addresses here
Update
The MRD-2 has a software update facility. The MRD-2 must be connected to the Internet for updating to work.
You can perform the update via the WEB interface of the communication server.
Checking for updates
You can use this function to check whether an update is available for your device.
1. Log in as usual to the communication server
2. Then log in with the Service PIN
