OSF 3100000430, Инструкция по установке и эксплуатации

Страница: 7 / 10

Operating Instructions PC-25 page 7 (10)
Set time
The current time is set with the key:
1. Press key
⇒
the display indicates
14:46
time
→
.
2. Now the time can be set with the and keys.
Press the key again to save the time. If on setting no key is pressed for
more than 10 seconds, the last displayed time will be automatically saved
and the normal operation display will appear again.
Programming time switch
The installed time switch is programmed with the key, whereas the on
period and the corresponding off period always have to be entered in
parallel:
1. Press key
⇒
the display will show
--- --
O N
→
1 .
.
2. By pressing the and keys the requested time can now be set.
3. Press again
⇒
the display will show
0:00
OFF
→
1.
4. By pressing the and keys the requested off period can now be set.
5. Press key again
⇒
the display will show
--- --
O N
→
2 .
6. Additional switching times can now be programmed as described in items
2-5.
7. To save the switching times, press the key again. If on setting no key
is pressed for more than 10 seconds, the last displayed switching time
will be automatically saved and the normal operation display will be
displayed again.
If switching times have already been programmed, these can be deleted by
using the key:
1. Press the key as long as the display shows the switching time that is to
be deleted.
1 4 :0 0
O N
→
2 .
2. Set the on period with the and keys to
--- --
O N
→
2 .
(between 23:59
and 0:00).
Delete the on period by pressing the again – the corresponding off period
will also be automatically deleted.