OSEE LMW-156H, Руководство пользователя

Страница: 26 / 35

LMW156 SERIES LCD MONITOR User Manual
— 22 —
Sub Menu Settings Explanation
USER CONFIG 1/5
SYSTEM SETUP
-NEXT PAGE
-BACKLIGHT
1
50 Adjusts the backlight
<0 ... 100>
-LINE 2 INPUT VIDOE Selects the LINE 2 input type
Ÿ
<VIDEO>
Ÿ
<Y/C>
Ÿ
<YPbPr>
-DVI-I INPUT
2
VGA Selects the DVI-I input type
Ÿ <VGA>
Ÿ <DVI-D>
Ÿ <HDMI>
-AUTO STANDBY OFF Sets the power saving mode
turn on/off PANEL (include backlight and panel
power supply, signal to panel)
Ÿ <ON> the monitor goes into power saving mode if
no signal is input for about one minute
Ÿ <OFF> the monitor keeps power on regardless input
signal status
-LANGUAGE ENGLISH <ENGLISH>: English
< 中文 >: Chinese
-COMPONENT
LEVEL
3
SMPTE Only for 480i60 component input, refer to table 1
Ÿ <SMPTE> for 100/0/100/0 signal
Ÿ <BETA0> for 100/0/75/0 signal
Ÿ <BETA7.5> for 100/7.5/75/7.5 signal
-NTSC SETUP
4
0 Only for NTSC signal
Ÿ <0> for Japan
Ÿ <7.5> for North America
-COLOR MATRIX
5
601 Applied to 480/60I or 480/60P
Ÿ <601>
Ÿ <709>
1. Backlight Intensity is a factor in the operating life of the backlight. Reducing the intensity will lengthen
the backlight life whilst maximum intensity will decrease backlight life.
2.
NOTES: the displaying signal, switching from HDMI to DVI-D or from DVI-D to HDMI, may not
normally display.
3. Component level only effects for YPbPr 480i input signal, and it will be set in blue color when other
signal. Component level always uses SMPTE except for 480i60 input signal.
4. NTSC SETUP only effects for NTSC input signal, and it will be set in blue color when other signal.
5. COLOR MATRIX is only applied to 480i/60 or 480/60p input signal, and it will be set in blue color when
other signal.
Press (up) or (down) button to select “NEXT PAGE” item, then press Enter button to display the
next page menu as follows.