40
41
43
42
45
44
47
46
DC 12V
Class 2 Only
MENU
POWER
VIDEO
DC
VIDEO OUT
CONTROL
Connect the video output of the camera to the video input of a monitor or other equipment.
When using a "loop through" connection of two or more monitors, set the 75
Խ
switch of only the final
monitor to on. Determine the type of cable according to the distance of the connected equipment.
DC 12V
Power Source
NOTE
Do not turn any component's power
on until all connections are completed.
To Power input terminal
To Video input connector
8. CONNECTIONS
Video Type lens :
Set lens Switch to Video. Connect the lens cable of a video Type lens.
If the plug on the cable is a different type, replace it with the provided 4-pin iris plug.
DC type lens :
Set lens switch to DC. Connect the lens cable of a DC(Galvanometric) type lens.
If the plug on the cable is a different type, replace it with the provided 4-pin iris plug.
Pin Assignment :
#1
#3
#2
#4
Pin No.
#1
#2
#3
#4
Signal
+9V DC
N.C
Video(1.0Vp-p, high impedance, no sync)
GND
VIDEO Iris Type Lens
Pin No.
#1
#2
#3
#4
Signal
Damping coil (-)
Damping coil (+)
Drive coil (+)
Drive coil (-)
DC Iris Type Lens
When using an auto-iris lens, install the accessory lens plug
on the lens cable as follows.
NOTE
After installing the connector plug, connect it to
the lens connector on the rear panel of camera.
Lens Connector
NTSC
PAL
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
768 (H) x 494 (V)
752 (H) x 582 (V)
Composite: 1.0Vp-p, 75
Խ
, Unbalanced
Internal Sync
More than 50dB (AGC OFF)
530 TV Lines
0.1 Lux (30IRE, AGC ON), 0.0008Lux (DSS x128)
C/CS Mount
Auto / Manual / Flickerless
x128~1/60~1/120,000 Sec.[NTSC], x128~1/50~1/120,000 Sec.[PAL]
ATW (1,800
ȋ
K~10,500
ȋ
K) / AWC / MANUAL
OFF / LOW / MIDDLE / HIGH
Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter
White Balance
Back Light Compensation
H i g h R e s o l u t i o n
MODEL
9. SPECIFICATIONS
OFF / LOW / MIDDLE / HIGH
OFF / LOW / MIDDLE / HIGH
ON / OFF
ON / OFF (4 Programmable Zone)
ON / OFF (4 Programmable Zone)
ON / OFF (Horizontal)
ON / OFF (Level Adjustable)
DC Iris / Video Iris / Manual Lens
DC 12V(10V~15V)
180mA / 2.2W (Max)
-10
ఁ
~+50
ఁ͑
(Recommendation:-5
ఁ
~+40
ఁ
)
-20
ఁ
~+60
ఁ
65(W)x59.6(H)x122.5(D)mm / 59(W)x58(H)x123.75(D)mm
Approx. 340g
Auto Gain Control
DNR
Color (D&N)
Motion Detection
Privacy
Mirror
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
External Dimensions
Weight
DC 12V Input Model
NTSC
PAL
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
768 (H) x 494 (V)
752 (H) x 582 (V)
Composite: 1.0Vp-p, 75
Խ
, Unbalanced
Internal Sync / Line-Lock Sync
More than 50dB (AGC OFF)
530 TV Lines
0.1 Lux (30IRE, AGC ON), 0.0008Lux (DSS x128)
C/CS Mount
Auto / Manual / Flickerless
x128~1/60~1/120,000 Sec.[NTSC], x128~1/50~1/120,000 Sec.[PAL]
ATW (1,800
ȋ
K~10,500
ȋ
K) / AWC / MANUAL
OFF / LOW / MIDDLE / HIGH
Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter
White Balance
Back Light Compensation
H i g h R e s o l u t i o n
MODEL
9. SPECIFICATIONS
OFF / LOW / MIDDLE / HIGH
OFF / LOW / MIDDLE / HIGH
ON / OFF
ON / OFF (4 Programmable Zone)
ON / OFF (4 Programmable Zone)
ON / OFF (Horizontal)
ON / OFF (Level Adjustable)
DC Iris / Video Iris / Manual Lens
AC 24V (20V~28V) or DC 12V (10V~15V)
330mA / 4W (Max)
-10
ఁ
~+50
ఁ͑
(Recommendation:-5
ఁ
~+40
ఁ
)
-20
ఁ
~+60
ఁ
65(W)x59.6(H)x122.5(D)mm / 59(W)x58(H)x123.75(D)mm
Approx. 340g
Auto Gain Control
DNR
Color (D&N)
Motion Detection
Privacy
Mirror
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
External Dimensions
Weight
AC 24V/ DC 12V Input Model
. Memo
