8
9
10
11
12
13
14
15
DC 12V
Class 2 Only
MENU
POWER
VIDEO
DC
VIDEO OUT
4. NAME AND FUNCTIONS
Holder Screw Hole
Used to install the camera on an optional
holder.(Tripod or Bracket)
The optional holder must be equipped with
the screw specified as shown right.
CS-Mount Holding Screw
Used to readjust back focus of the camera.
There are two back focus lock screws.
These must be loosened before the camera
may be back focused.
Loosen the lock screws to turn the CS-mount
lens adaptor, and tighten the lock
screws after adjustment.
Auto Iris Lens Connector
Used to connect Auto Iris Lens plug.
C-Mount Lens Adapter
Used to attach C-mount lens.
CS-Mount Lens Adapter
Used to attach CS-mount lens.
1/4"- 20 UNC (20 THREAD)
L : 4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)
L
Θ
Lens Selection Switch
Used to choose DC or VIDEO or ELC according to the type of your Lens.
Ι
POWER Input Terminal
Used to connect an AC 24V or DC 12V power source.
Used to connect a DC 12V power source.
Λ
Power Indicate LED
Κ
VIDEO OUT Jack
Used to connect an external video monitor in jack.
Η
Function Setup Button
Functions can be setup using 5 buttons on the camera's rear panel.
MENU Buttons :
Used to access menu mode.
Also used to escape menu mode.
UP / DOWN Buttons :
Used to choose the desired
menu item. It also moves the cursor up or down in
the menu screen.
LEFT/RIGHT Buttons:
Used to change the parameter
of the selected menu item. It also moves the cursor
the left of right in the menu screen.
MENU
DC 12V
Η
Function
Setup Button
Κ
Video Out Jack
Θ
Lens Selection
Swicth
Λ
Power Indicate LED
Ι
Power Input
Terminal
Class 2 Only
MENU
POWER
VIDEO
DC
DC 12V Input Model
VIDEO OUT
Class 2 Only
MENU
POWER
VIDEO
DC
VIDEO OUT
AC 24V / DC 12V Input Model
AC 24V
/
DC 12V
5. OPERATING CAMERA
LENS
SHUTTER
WHITE BALANCE
BACKLIGHT
AGC (Auto Gain Control)
DNR (Digital Noise Reduction)
SENS-UP
SPECIAL
EXIT
• MANUAL
• DC/VIDEO
• ESC
• MANUAL
• FLK
• ATW
• MANUAL
• AWC
• OFF
• LOW
• MIDDLE
• HIGH
• OFF
• LOW
• MIDDLE
• HIGH
• OFF
• LOW
• MIDDLE
• HIGH
• OFF
• AUTO
• CAMERA ID
• COLOR
• SYNC
• MOTION DET
• PRIVACY
• MIRROR
• SHARPNESS
• RESET
• RETURN
S E T U P M E N U
- DOWN Button
- UP Button
- LEFT Button
- RIGHT Button
- MENU(SET) Button
Use five buttons on rear side of the camera.
SETUP
- Press the MENU button to access the setup mode.
• Select the status using the
ඔ
,
ඖ
,
̵
,
̷
button.
• Move the cuser to character enter location by
using the button.
Setting up the Menu
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
MANUAL
ESC
ATW
OFF
LOW
LOW
OFF
1. Press the MENU button to access the SETUP mode.
• SETUP menu is displayed on the monitor screen.
2. Select the desired feature using the UP or DOWN button.
• Each time you press the UP or DOWN button, the arrow indicator moves UP or DOWN.
• Move the arrow indicator the desired feature item.
3. Change the status of the selected feature using the LEFT or RIGHT button.
• If you Press RIGHT or LEFT button, it appears available status. Press the button when gets desired feature.
4. When completed, move the arrow indicator to 'EXIT' and press the MENU button.
Main Menu -
SETUP
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
---
AWC
HIGH
HIGH
LOW
AUTO
!
You can access submenu using MENU button.
For the mode with '---', you may not access submenu.
NOTE
Main Menu -
LENS
1) Setting up the LENS
Select the lens pressing the RIGHT button.
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
MANUAL
FLK
AWC
HIGH
OFF
---
---
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
---
AWC
HIGH
HIGH
LOW
AUTO
Η
On the SETUP menu screen, move the arrow indicator to the lens using the UP or DOWN button.
Θ
Select the desired feature using the LEFT or RIGHT button.
Main Menu -
SHUTTER SPEED CONTROL(1)
!
AUTO IRIS LENS(DC TYPE)is recommended than MANUAL LENS.
Some lens can make a malfunction according to the BRIGHTNESS LEVEL.
NOTE
When DC LENS selected, press MENU button to control the BRIGHTNESS.
B r i g h t n e s s
Pr e s s S E T t o Re t u r n
BRIGHTNESS
25
