16
17
19
18
21
20
23
22
Main Menu -
WHITE BALANCE
3) WHITE BAL. (White Balance)
When you need to control the color on the screen, use 'WHITE BALANCE' function.
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
---
AWC
HIGH
OFF
---
---
Η
Press the MENU button to display the SETUP menu and move the arrow indicator to 'WHITE BALANCE'
using the UP or DOWN button.
Θ
Set 'WHITE BAL.' To the desired mode using LEFT or RIGHT button.
ATW(Auto Tracking White Balance)
: When color temperature is 1,800
ȋ
K~10,500
ȋ
K, select this mode.
(ex. A fluorecent lamp, outdoor)
AWC(Auto White Balance Control)
: The white balance is automatically adjusted in a specific environment.
In order to obtain the best result, press the set button while the camera focuses on white paper.
If the environment including the light source is changed, you have to adjust the white balance again.
2) Shutter status and speed control
You can control brightness of the screen by the shutter speed.
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
---
AWC
HIGH
OFF
---
---
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
MANUAL
FLK
AWC
HIGH
OFF
---
---
Η
Press the MENU button to display the setup menu and move the arrow indicator to 'SHUTTER' using the UP or DOWN button.
Θ
Set 'SHUTTER' to the desired mode using the LEFT or RIGHT button.
OFF
: Deactivation
FLK
: Flicker mode
- NTSC (1/100)
- PAL (1/120)
Main Menu -
SHUTTER SPEED CONTROL(2)
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
MANUAL
MANUAL
AWC
HIGH
OFF
---
---
MANUAL
: When setting shutter speed manually.(Only for manual LENS mode)
You can select speed from
- NTSC (x128~x2, 1/60~1/120,000 sec.)
- PAL (x128~x2, 1/50~1/120,000 sec)
S H U T T E R
Pr e s s S E T t o Re t u r n
MANUAL
1/60
Main Menu -
DNR
6) DNR (Digital Noise Reduction)
DNR reduce the noise on the screen.
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
---
AWC
HIGH
OFF
---
---
Η
Press the MENU button to display the SETUP menu and move the arrow indicator to 'DNR' using the UP or
DOWN button.
Θ
SET 'DNR' to the desired mode using the LEFT or RIGHT button.
OFF
: Deactivation
LOW
: Low reduction
of the noise
MIDDLE
: Middle
reduction of the noise
HIGH
: High reduction
of the noise
!
Afterimage may appear with DNR
When selected 'AGC' menu OFF, DNR doesn't work.
If you change the 'AGC' menu from AGC-L to AGC-H, sensitivity is
increasing as well as noise on the screen.
NOTE
MANUAL
: To fine adjust, select the Manual mode. You can increase or decrease the red
or blue factor while monitoring the difference on the screen. Set to 'MANUAL'
mode and press the MENU button, lncrease or decrease the value for RED(R-Gain)
and BLUE(B-Gain), watching the color of the picture, and press the MENU button
when you obtain the best color.
!
Proper White Balance may not be obtained under the following
conditions, in these cases select the AWC mode.
- When the scene contains mostly high color temperature object,
such as a blue sky or sunset.
- When the scene is dim.
- If your camera faces fluorescent lamp directly or is installed in the
place of the changing illumination.
NOTE
Ι
When completed, press 'MENU'
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
MANUAL
ESC
AWC
HIGH
OFF
---
---
ESC
: You can control
the BRIGHTNESS.
!
Don't expose the camera to fluorescent lamp directly not to get unstable
image in the internal synchronization modes.
When the SHUTTER menu is set to FLK mode. SENS-UP can not work.
Please control the menu.
NOTE
B r i g h t n e s s
Pr e s s S E T t o Re t u r n
BRIGHTNESS
25
Main Menu -
AGC
5) AGC (Auto Gain Control)
AGC is to get bright picture. Higher GAIN level, getting brighter screen. But you can get noise increase.
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
---
AWC
HIGH
OFF
---
---
Η
Press the MENU button to display the SETUP menu and move the arrow indicator to 'AGC' using the
UP or DOWN button.
Θ
SET 'AGC' to the desired mode using the LEFT or RIGHT button.
OFF
LOW
MIDDLE
HIGH
Main Menu -
BACKLIGHT
4) BACKLIGHT
When there is a strong backlight behind the object, clear images of the background as well as the object can
still be obtained by using the BACKLIGHT function.
S E T U P
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
---
AWC
HIGH
OFF
---
---
Η
Press the MENU button to display the SETUP menu and move the arrow indicator to 'BACKLIGHT' using the UP or DOWN button.
Θ
SET 'BACKLIGHT' to the desired mode using the LEFT or RIGHT button.
OFF
LOW
MIDDLE
HIGH
BLC ON
BLC OFF
