2
Product Highlights
Certified in compliance with IEC 60598-2-5:1998 (safety), EN 55015 + EN 61547 (CE), EN
301 489-1/-3 + EN 300 440-2 (RF), FCC Part 15B/15C (FCC), EN 60945 (marine), IP67.
Powered by latest LED technology.
Brighter than 100 Watts halogen bulb, power usage as low as 54 Watts.
355° two speed horizontal rotation, 50° vertical range.
Can use multiple remote controls and add a joystick control panel.
Digital remote control signal reliable and resistant to interference.
Uses telephone line. Simple connection compared to traditional wire harness.
Aluminum body with corrosion-resistant coating.
Completely sealed and waterproof.
12 Volts DC input power.
(24 Volts DC input power for 13.226.24)
Specifications
Material
Aluminum body, glass front cover
Styling
Streamline
Light Source
High power LED (18 LED @ 54 Watts), over-heating protection
Light Coverage
0.25 Lux @ 726 m, triple spot diameter vs. 100W Halogen light bulb
Light Mode
Spot light
Rotation
355° horizontal (dual speed), 50° vertical, jam protection
Power Cable
5 ft
Power Supply
12 VDC
(24V DC for 13.226.24)
Size L x W x H
21 x 20 x 25 (cm)
Weight
5.5 kg
Current Draw
5 Amp
(2.5 Amp for 13.226.24)
Installation
Spot Light Installation
1. The spot light should be installed on flat, level, and non-metal surface.
2. Make use of the foam gasket to mark mounting holes and wiring access (1 inch or 25.4 mm) on
flat surface, see picture below. Make wiring access.
3. Route the power cable and signal lines through wiring access of the gasket and flat surface.
4. Secure deck mount by four (4) self-tapping screws of 1/4 inch (6 mm), or bolts and nuts.
！
Remember to install the foam gasket, and ensure proper sealing.
