4
！
Provide water and weather protection for the location where joystick control panel is installed.
Remote Control Bracket Installation
1. Take off mounting plate from the back of bracket. Secure mounting plate on selected location
with the two (2) self-tapping screws that come with the product.
2. Fit bracket to mounting plate as shown in below.
！
Provide water and weather protection for the location where remote control bracket is installed.
Mounted Remote Control Installation (allows multiple controls for one light)
1. The mounted remote control should be installed on flat surface at a dry location.
2. Make wiring access of size 5/8 inch or 16 mm.
3. Remove the front cover then route the power cable through wiring access.
4. Secure mounted remote control by two (2) M4 self-tapping screws. Put back the front cover.
