Osaki TP-8500, Руководство по эксплуатации

Страница: 9 / 11

. Unscrew the screw on the front-end of armrest (note: the screw is in the side of
steel frame). (figure 7)
. Unscrew the screw on the front-end of armrest (note: be careful not
to
misplace the plastic black block)
. (figure 8)
Figure 7 Figure 8
. Unscrew the screw on the back-end of armrest (note: zip the backrest kneading
cloth open compl
etely to access the screw
). (figure 9)
. Gently lift up the front-end of armrest, pull out the buckle. (figure 10)
Figure 9 Figure 10
Lift up gently
. Gently pull forward the back-end of armrest to pull out the
plastic part of the panel (Figure 11).
Before complete removing the side panel there is a hose connection that has to be unplugged
first (Figure 12).
Pull forward gently
Figure 11 Figure 12
Connect the air pipe on the back-end of armrest to the upper arm
s
. (figure 1)
Put the air pipe and power cord into the steel frame (avoid the air pipe
blockage
). (figure 2)
Figure 1 Figure 2
Hook the back-end of armrest on the steel frame
as shown in the illustration
(figure 3)
.
Insert the back-end of armrest into the
plastic
cover of upper arm. (figure 4)
Figure 3 Figure 4
Hook the front-end of armrest on the steel frame and lock the buckle. (figure 5)
Gently push the armrest down, double check if the hook well locked. (figure 6)
Figure 5 Figure 6
Put the plastic block between the armrest and
legrest
, then tighten the up &
down screws. (figure 7)
Tighten the screws on the back-end of armrest. (figure 8)
Figure 7 Figure 8
PRESS IT
DOWNW
ARD G
ENTL
Y
6.Armrest installation method
Method of usage Method of usage
15
14