Osaki OS6000, Руководство пользователя

Страница: 9 / 32

8
Step 1: Remove the chair parts out of the two cartons:
1) Massage chair part
3) Side panel
Note: The parts and the serial number of them in the below installation are corresponding
to the parts list.
Step 2: Connect pipes and terminals between the side panels and seat part as
demonstrated in PIC 1.
Step 3: Install side panels.
1) Insert the side panels along the hook D to the holder C (on the seat) at 90 degrees as
demonstrated in PIC 2.
2) Adjust the side panel to make the holes aligned, lock the hex screws as demonstrated
in PIC 3.
Note: 1) Please be careful to avoid scratching during installation.
2) The hex screws, gaskets and spring washers are packed in a small bag
marked “1”.
3) Please always bear in mind to fix the side panels to the chair without backrest,
meanwhile, lifting up the seat pad for easier to tighten the screws. Once you
fix one of the side panels, please don’t tighten the two screws immediately until
you make sure the two screws are perfectly fitting to each holes.
Air pipe colour
label: white
3
1
LED jack
Valve jack
PIC 1