Osaki OS 4000CS, Инструкция по эксплуатации

Страница: 19 / 24

23/24. Recline / Incline
• Control the recline / incline angle of the chair.
• Press once and the backrest will move to a horizontal reclining position or an
upright sitting position. Press again to stop at your preferred angle.
25. Kneading
• Press this button once to activate the kneading function for a full back
massage. Press again to stop the kneading function.
• Kneading function strength can be adjusted by pressing “Speed” button after
activating kneading function.
• Kneading function can be combined with tapping or shiatsu.
26. Tapping
• Press this button once to activate the tapping function for a continuous full
back massage. Press again to stop the tapping function.
• Tapping width and speed can be adjusted by pressing “Width” and “Speed”
button respectively after activating tapping function.
• Tapping function can be combined with kneading function.
27. Shiatsu
• Press this button once to activate the shiatsu function for a continuous full back
massage. Press again to stop the shiatsu function.
• Shiatsu width and speed can be adjusted by pressing “Width” and “Speed”
button respectively after activating shiatsu function.
• Shiatsu function can be combined with kneading function.
28. Rolling
• Press this button once to activate the rolling function for a full back massage.
Press again to stop the rolling function.
• Rolling width can be adjusted by pressing “Width” button after activating rolling
function.
How to End
• Press the Power button to stop the massage operation.
• Massage rollers will reset automatically.
• The Power button will light up until the massage rollers resume their original
position.
• After the Power button light turns off, switch the power button under the chair to
“O” position and disconnect the power cord plug.
Programs and Operation
17