Osaki OS 4000CS, Инструкция по эксплуатации

Страница: 17 / 24

7 .Relax
• Engages the full body relax auto program.
• This program will start with slow kneading and heavy tapping massage,
progressing to in-depth massage targeting the neck and lower back.
8.Full Air
• Engages the the full body air pressure auto program.
• This program applies full body air pressure massage to shoulder, arm, palm,
lower back, buttocks, thighs, calves and feet.
• Full Air intensity can be adjusted by pressing “Intensity” button respectively
after activating full air function.
9.Manual Air
• Press this button to activate and select air massage zone between armrest,
shoulder & waist, calves and feet.
• Air intensity can be adjusted by pressing "Intensity" button respectively after
activating manual air function.
• Full Air intensity can be adjusted by pressing “Intensity” button respectively
after activating full air function.
10/11.◄/►Width
• Controls the width of the rollers.
• Select a massage function and press to adjust between Narrow, Normal and
Wide.
• It can be used to activate the Tapping, Shiatsu and Rolling massage.
12/13. ▲/▼Position
• Adjust back massage position.
• Press ▲ or ▼ to choose position of massage rollers when a “beep” sound
alerts in 10 seconds.
• Release the button once the desired position is achieved.
Note:This can also be used during sector massages.
14. Vibration
• Press this button once to activate the seat vibration function. Press the button
again to stop the seat vibration function.
• The vibration mode can be switched on or off while any of the programs are
running.
Programs and Operation
15