6. Assembly declaration
Ortlieb Präzisionssysteme GmbH & Co. KG • Jurastr.11 • 73119 Zell unter Aichelberg • Germany
19
e-mail: [email protected] • www.ortlieb.net
6 Assembly declaration
for an incomplete machine (acc. machine directive 2006/42/EG)
Name of the company and producer:
Ortlieb Präzisionssysteme GmbH & Co. KG
Jurastr.11
73119 Zell unter Aichelberg
E-Mail: [email protected]
The
Tool-Grip
®
HSK-Tool-gripper
is described as an incomplete machine according article 2g of
the machine directive and designated only to be mounted into or with an other machine or
equipment.
The following fundamental safety and health-protection requirements according attachment 1 of
the machine directive were used, are valid and adhered:
Nr. 1.1.3, Nr. 1.3.2, Nr. 1.5.4, Nr. 1.6.1
The following standards (or extracts of these standards) are used:
DIN 69893, DIN 69063,
The start-up of this product is forbidden until it is proven, that the machine in which the above
named incomplete machine is mounted to conforms the regulations according the machine
directive 2006/42/EG.
The special technical documentations according attachment VII part B have been complied. The
producer obligates to provide these documentations in written form to public authorities if their
request is justified.
Only the management of Ortlieb Präzisionssysteme GmbH & Co. KG, represented by
Mr. Dirk Laubengeiger, is authorized to comply the relevant technical documents according
attachment VIII B to this product
Zell unter Aichelberg,