ORTILEB KSFB 26/100 Скачать руководство пользователя страница 3

Страница: 3 / 16

1. General

Ortlieb Präzisionssysteme GmbH & Co. KG • Jura Str. 11 • 73113 Zell u. Aichelberg • Germany

Tel.: +49 (0) 7164 79 70 1-0 • Fax.: +49 (0) 7164 79 70 1-51 • e-mail: [email protected] • www.ortlieb.net

1 General

1.1 Introduction

This manual helps you to operate your Ortlieb product safely and to avoid potential dangers and

risks

Please read this manual and the safety instructions before initial operation.

This technical documentation includes all files and data for initial operation, maintenance and

service of your Ortlieb product. Ortlieb Präzisionssysteme GmbH & Co. KG does not guarantee

any accountability for damages and operational disturbances, occurred by disregarding several

issues.

Ortlieb Präzisionssysteme GmbH & Co. KG reserves the right for technical changes to increase the

product usability and to improve quality. No accountability on print errors.

Please mind the regulations for the prevention of industrial accidents besides the indexed safety

instructions while initial operation, operation and maintenance. Observing these regulations and

advices avoids damages to persons, machines and to this Ortlieb product.

Содержание KSFB 26/100

















Результаты поиска

Содержание KSFB 26/100

Отзывы:

Похожие инструкции для KSFB 26/100

Бренды по названию

Популярные бренды

ORTILEB KSFB 26/100, Техническая документация инструкция

Результаты поиска

Содержание KSFB 26/100

Отзывы:

Похожие инструкции для KSFB 26/100

Бренды по названию

Популярные бренды