ORTEC Micro-Detective-HX, Руководство по эксплуатации

Страница: 75 / 96

65
APPENDIX A. OTHER ADMINISTRATOR-LEVEL
FEATURES
This appendix describes administrator-access features and commands not discussed elsewhere in
the manual.
A.1. External Mode
This mode allows you to connect the HX to a PC so the unit can be tested for performance
consistency (see the Performance Check Guide) or used as a high-performance, benchtop HPGe
detector and MCA.
!
To enter External mode: From the Home screen, navigate to Main Menu, Comm
(password), and select External. After a brief delay, the center section of the screen will
display External Control Mode.
!
To exit External mode, disconnect the USB cable then press or tap the N button. Within
15–20 seconds the HX will return to normal operation mode. All HPGe detector settings will
be restored to the values in use before External mode was used.
A.2. Power Off
This command shuts down the HX computer and detector high voltage. The cooler (if running)
remains on. Navigate to Main Menu, Settings, Advanced (password), Hardware, Power, then
select Power Off.
Alternatively, you can press and hold the computer’s On/Off button to display the Password
screen. Enter the password to display the Power menu, then tap Shutdown.
A.3. Restart
This command reboots the HX computer, which restarts the HX program at the Home screen.
The cooler (if running) remains on during restart. Navigate to Main Menu, Settings, Advanced
(password), Hardware, Power, and select Restart.
Alternatively, you can press the computer’s On/Off button to display the Password screen, enter
the password to display the Power menu, then tap Restart.