10
5.2. CLEANING
If it is necessary to clean the components and/or the
printed circuit in the 142 at any time, use only
methanol as a cleaning solvent. Do not use
compressed air or other source of pressurized gas
unless it is known to be clean and free of
compressor oil, and do not use any cleaning agent
other than methanol.
5.3. FACTORY REPAIR
This instrument can be returned to ORTEC for
service and repair at a nominal cost. Our standard
procedure for repair ensures the same quality
control and checkout that are used for a new
instrument. Always contact the Customer Service
Department at ORTEC, (865) 482-4411, before
sending in an instrument for repair to obtain
shipping instructions and so that the required Return
Authorization Number can be assigned to the unit.
Write this number on the address label and on the
package to ensure prompt attention when it reaches
the factory.
