4. Connections
5.Operations
5.1
Quick guide
CONNECTION
Connect the input cable from the preamplifier first, followed by the output cable to the loudspeakers,
and finally the power cord.
INPUT FORMAT
Select either the unbalanced input on RCA connector or the balanced input on XLR connector by
flipping the switch up or down respectively
TRIGGER MODE
Select either the pilot mode or the manual mode by flipping the switch left or right respectively.
POWER ON
Flip the main power switch at the back of the unit from 0 to I.
The main power indicator on the front panel will blink red (approx. 4 sec ) and blue when ready for
operation.
GOING INTO STANDBY (ONLY IN MANUAL TRIGGER MODE)
Press the button once and wait that red light stop blinking.
ORPHEUS MEDIA SARL
– Avenue des Sciences 3 – 1400 Yverdon-les-Bains - Phone : +41 24 423 90 88 – Fax : +41 24 424 90 89
Email :
– Website: www.orpheuslab.com
7
Input for one balanced
or unbalanced channel,
e.g. Right or left
channel from
preamplifier
Dual output, e.g. Right
or left channel to
loudspeaker single or bi-
wired
Input for trigger
channel, e.g. T rigger
output channel from
preamplifier
Output to another
amplifier
