3.Rear Panel
1. INPUT
Balanced (XLR in) and unbalanced(RCA in) input connectors
2. INPUT SELECTOR SWITCH
Press the switch either to the up to select the unbalanced input or to the down to select the
balanced input.
3. OUTPUT
Direct output to chain the amplifier for multi-amplification (see Connection chap.)
4. SPEAKER OUTPUT
Dual output connectors in parallel.
5. TRIGGER INPUT
Entrée trigger permet de piloter l'ampli grâce à un préamplificateur doté de sorties trigger.
6. TRIGGER SELECTOR SWITCH
Press the switch either to the left to select the pilot mode or to the right to select the manual
mode.
7. INPUT VOLTAGE SELECTOR & FUSE RECEPTACLE
The input voltage selector switch configures the unit to the line voltage of the country where it
is used.
The main fuse is located in the fuse receptacle. If it has to be changed, replace it by a T10A
slow-blow fuse.
8. POWER SUPPLY & POWER SWITCH
Power cord connection and main power switch.
ORPHEUS MEDIA SARL
– Avenue des Sciences 3 – 1400 Yverdon-les-Bains - Phone : +41 24 423 90 88 – Fax : +41 24 424 90 89
Email :
– Website: www.orpheuslab.com
6
① ② ③ ④ ⑤⑥⑦ ⑧
