ORPHEUS ONE SE
8
S E T U P A N D O P E R A T I O N S
QUICK GUIDE
POWER ON
Flip the main power switch on the right hand side
of rear panel.
MAIN SCREEN
After switching on the unit, the display window
shows the start up display shortly. It then switches
to the default main screen which shows input se-
lections for listening and recording.
To use the One SE with a PC to play music
• Flip the main power switch on the left hand side
from 0 to I.
• Select the input “USB MODE ”
• And connect the One SE to your PC by USB.
• After an few seconds, the One SE will be ready
to play music like an soundcard.
To use the One SE with a MAC to play music
• Flip the main power switch on the left hand side
from 0 to I.
• Select the input “USB MODE ”
• And connect the One SE to your MAC by USB.
• Click on the icon Preference Panes (usually lo-
cated on the the dock).
• Click on the loutspeaker to modify the sound
settings.
• Click on the output tab.
• Click on USB Audio to choose this type of output
rather
than
the
onboard
speaker
of the computer.
• The One SE is now ready to play music like an
external sound card.
START UP DISPLAY
The start up display is shown approx. 2 seconds
when main power is switched on.
It is then replaced by the main screen.
ORPHEUS ONE SE
DA CONVERTER
1
AES/EBU
2
MAIN SCREEN
The main screen is the default display during nor-
mal operation.
It shows the name of the digital input format se-
lected.
To choose between input formats press
<
or
>
until the desired input format is displayed.
Options:
AES/EBU
SPDIF 1 or 2
BNC 1 or 2
USB MODE
TOSLINK
Select between the various options according to
your digital source and the connection establis-
hed.
3
UPSAMPLING
When pressing
^
or
v
the display shows the
upsampling details of the chosen input. The sam-
pling rate conversion to the high difinition signal
which is then converted to the analogue domain is
shown in kHz and is displayed for approx. 2 se-
conds upon succesfull lock on to the data stream
of the chosen digital input format.
Hereafter the display returns to default main
screen.
If the system has not been able to lock on to the
data stream of the chosen input the display shows
NO LOCK.
NO PCM indicates that a non linear PCM data
stream is recieved from for example a DTS CD.
3a
SETUP>
STANDBY
SETUP MENU
From main screen press
to
enter setup menu.
To choose between the setup menu options press
<
or
>
untill the desired option is displayed.
LEAVING SETUP MENU
At any point in the setup menu you can return to
the former menu level by pressing
^
followed by
.
44,1 -
>
192
Содержание ONE SE MK2
Страница 1: ...ORPHEUS ONE SE MK2 U S E R M A N U A L...
