ORPHEUS ONE SE MK2, Руководство пользователя

Страница: 10 / 11

ORPHEUS ONE SE
10
S E T U P A N D O P E R A T I O N S
SETUP>
KEY REPEAT RATE
KEY REPEAT RATE
Press  to enter key repeat rate mode.
Holding down < or > is the same as repeatedly
pressing them. The repetition rate can be ad-
justed in three intervals.
Options:

SLOW (0,6 seconds)

MEDIUM (0,4 seconds)

FAST (0,2 seconds)
To set repeat rate pres < or > until the chosen
rate is displayed. Pres  to confirm.
7
SETUP>
NIGHT MODE
NIGHT MODE
To enter night mode press  .
When night mode is in position ON the display
turns off automatically approx. 3 seconds after
pressing any button on the remote control.
The unit is still operating and the display lighting
is reactivated by pressing any control button.
To set night mode press < or > until the chosen
mode is displayed. Press 
to confirm.
9
SETUP>
PREFERENCES
To enter preferences press  .
The various settings allow a personalized unit
configuration. The personal settings need to be
saved before turning off main power.
It is possible to restore previously stored settings
as well as calling back the initial factory settings.
Options:

SAVE

RESET

FACTORY SETTINGS
Press < or > until the chosen mode is displayed.
Press  to confirm.
In case of RESET and FACTORY SETTINGS
press
 to confirm.
FACTORY SETTINGS has the following values :
Names : AES/EBU
SPDIF 1 and 2
BNC 1 and 2
TOSLINK
Phase: NORMAL
Repeat rate : MEDIUM
Display : 100%
Nightmode: OFF
10
SETUP>
PHASE
PHASE SELECTION
To enter phase selection pres  .
This function gives to possibility to select phase.
Normal mode gives the natural perspective of
music. Inversion mode changes the absolute
phase by 180 dg.
Options:

NORMAL

INVERSION
To select phase pres < or > until the chosen
phase is displayed. Press  to confirm.
6
SETUP>
DISPLAY
DISPLAY
To enter display mode press  .
The display lighting can be adjusted from 100% to
25% in 25% steps. The main power indicator light
on the left side of the front panel is adjusted ac-
cordingly.
To increase or decrease the value press
^
or v .
Press  to confirm.
8