10
Input card number # or
User ID number # Input card number #
Users can be added consecutively without having to exit from the programming mode.
Adding PIN user
User ID number # PIN code #
Users can be added consecutively without having to exit from the programming mode.
Delete users
12
Read card # or
User ID number # or
Input card number #
Users can be deleted consecutively without having to exit from the programming mode.
Delete all users
07
0000 #
Note: All Zone 1 and Zone 2 users will be deleted.
Access settings
Card access
* Main code #
13
0 #
Card + PIN code access
1 #
Card or PIN code access
2 # (default setting)
Output activation time adjustment
14
0-99 # (factory setting is 5 seconds, 0=50ms)
Relay setting: pulse mode
15
0 # (default setting)
Each time a valid card/tag/PIN is read, the relay will operate for a pre-set relay pulse
time.
Relay setting: bistable mode
1 #
Each time a valid card/tag/PIN is read, the relay changes its state (open/closed) until the
card/tag/PIN is read again.
Door opening setting with multiple
cards
16
1-10 # (Factory setting is 1 card)
Important! The door will only open after all valid cards have been read (according to the
set number of card readings)
Adding multiple card users
17
User ID number # input card number # cards quantity #
User settings
–
Zone 2
Adding card user
* Main code #
21
Read card # or
User ID number # Read card # or
Input card number # or
User ID number # Input card number #
Users can be added consecutively without having to exit from the programming mode.
Adding PIN user
User ID number # PIN code #
Users can be added consecutively without having to exit from the programming mode.
Delete users
22
Read card # or
User ID number # or
Input card number #
Users can be deleted consecutively without having to exit from the programming mode.
Access settings
Card access
* Main code #
23
0 #
Card + PIN code access
1 #
Card or PIN code access
2 # (default setting)
Output activation time adjustment
24
0-99 # (factory setting is 5 seconds, 0=50ms)
Relay setting: pulse mode
* Main code #
25
0 # (default setting)
Each time a valid card/tag/PIN is read, the relay will operate for a pre-set relay pulse
time.
Relay setting: bistable mode
1 #
Each time a valid card/tag/PIN is read, the relay changes its state (open/closed) until the
card/tag/PIN is read again.
Door opening setting with multiple
cards
26
1-10 # (Factory setting is 1 card)
Important! The door will only open after all valid cards have been read (according to the
set number of card readings)
Adding multiple card users
27
User ID number # input card number # cards quantity #
Safety mode settings
Normal mode
* Main code #
35
0 # (factory default)
Safety mode
1 #
If the wrong card is read or the wrong PIN is entered 10 times within 10 minutes, the
system will be blocked for 10 minutes.
Additional settings
Buzzer muted (except for entering
programming mode)
* Main code #
41
0 #
Buzzer when keys are pressed
1 # (factory default)
Keypad sounds will be activated every time the key is pressed
Disabling the keyboard backlight
42
0 #
Activating the keyboard backlight
1 #
Automatic keyboard backlighting at
the press of a button
2 # (factory default)
LED off during sleep mode
43
0 #
LED blinks during sleep mode
1 # (factory default)
