Page
8
2.
Carefully place the indoor monitor against the bracket and gently push down the
monitor so that the pins on the bracket engage in the slots on the rear of the
monitor.
3.
Secure the assembly with the 2 screws.
Only after having connected the roadside panel,connect the 230 V~ power supply
to the adapter.
Make sure the power supply polarity is correct.
D) Installation of outdoor camera (Two ways for option)
Options
Screws to be used
Adding the Angel Bracket
Screw B1 Screw B2 Screw B3
Without Angel Bracket
Screw B1 Screw B4
Option 1
（
With angle bracket
）
1) Screw the angle bracket to the wall by 2 screws (Screw B1) (Fig.1)
2) Screw the rainshield to the angle bracket by the screw B2 (Fig. 2)
3) Connect all the wires & install the door panel inside the rainshield (Fig. 3)
4) Fix the door panel inside the rainshield by the screw (Screw B3) (Fig. 4)
5) Install the cap and fix it tightly (Fig. 5&Fig. 6)
1 2 3
