13
1. Voice call - user call to control
2. Working mode: controller have four different working modes, selectable control modes depending on the type of the gate
A-mode: NON LOCK (Timer)
B-mode: SELF LOCK (Bistable operation)
C-mode: NON LOCK (two relays can work)
D-mode: INTER LOCK (two relays can work)
Important: MODE C and MODE D apply to the 2-channel GSM controller!
3. OUT 1 working time: the factory default function and allows any authorized caller to activate relay 1 from 1second up to 65000.
4. OUT 2 working time: MODE C allows you to program both relay 1 and relay 2 for an nonindependent period of 1second up to 65,000 seconds.
In addition it is possible to program a time delay from when, relay 1 latches and relay 2 isactivated. The time delay can be set from 1 second up to 65,000 seconds and
if there is no time delay set, then relay 2 will not activate.
(Note: Does not apply to model OR-GB-449).
5. OUT1 SMS confirmation - you can choose to receive or not receive SMS confirmations when relay is activated and deactivated.
6. OUT2 SMS confirmation - you can choose to receive or not receive SMS confirmations when relay is activated and deactivated.
(Note: Does not apply to model OR-GB-449).
Page 4
1. SMS - user send SMS to control
2. OUT1 OFF/ON, OUT2 OFF/ON: The system allows up to 20 characters for each customized message.
3. OUTPUT 1/ OUTPUT 2 - working time (SEC): Relay working time is 1-65000 seconds (optional)
Note: OUTPUT2- Output 2 function applies to the 2-channel GSM controller!
Page 5
