IG-156-EN version 04; 25/01/19
15
General instructions
Web Application: Web server (HTTP and HTTPS)
ekor.ccp
4. Web Application: Web server (HTTP and HTTPS)
4.1. Web Server Access Local access and remote access
The ekor.ccp unit has a Web Application Server, which can
be be accessed via HTTP and HTTPS.
This access can be in local mode and in remote mode via
any of the Ethernet ports on the unit. Consulting and/or
modifying parameters, consulting records and logs,
updating Firmware, etc. is carried out via this server.
The website can be accessed via any web browser (Internet
Explorer, Firefox.). Communications equipment with WAN
access connected to the ekor.ccp unit must be configured
for remote access.
As a requirement to access the Web the user must be
authenticated by entering a user name and password
defined by the client.
1
IP address
2
Username
3
Password
Figure 4.1.
User authentication
It is possible to perform user authentication via the LDAP
protocol.
4.1.1. Local access
The default local access IP address is 100.0.0.1 .
Two types of user are possible: one with rights to view and/or
modify substation and remote control parameters and one
only with rights to view the information, without being able
to make any changes to the configuration.
The default passwords for installer mode (can be modified
from the Web page) are:
1. Username: Admin
2. Password: Change
The default passwords for user mode (modified from the
Web page itself) are:
1. Username: User
2. Password: Mira
4.1.2. Remote access
The remote access IP address will be the one defined in the
IP1 and IP2 associated with the substation, using the same
default passwords as described in the previous section.
It is possible to include the LDAP protocol for authentication
by validating user credentials.
