Orlanski ORLIGNO 200, Инструкция по эксплуатации и руководство по обслуживанию

Страница: 15 / 24

1. Temperatures range -9 °C +99 °C
2. Temperatures settings +60 °C do +97 °C
3. Pump temperatures range +65 °C do +90 °C
4. Blow-through settings
work time 0-90 seconds
pause 1-15 minutes
Blow-through turn off P-0
5. Hysteresis od 2 °C do 9 °C
6. Input power:
fan 100 W
pump 100 W
7. Voltage AC 230 V AC, 50 Hz
8. Input volatge 275 VA
9. Fan power in percentages % x 10 (setting range 30 % to 100 %)
10. Relative air temperature ≤95 %
11. Protection class IP 40
12. Insulation class I
13. Ambient temperature 0-40 °C
14. Disconnection type full
15. Electric protection 2 x 1.25 A (fusible)
2. Technical data
2.1. EKOSTER 2 – technical data
2.2. EKOSTER 2 – installation recommendations
1. Controller is adjusted to cooperate with solid fuel boilers.
2. Controller must be installed by qualified person.
3. Controller cannot work at temperatures higher than 40°C.
4. Controller should be protected against water flooding and steam condensation.
5. Controller should be installed and used according to handling rules with electric equipment.
6. Fuse burning as a result of wrong pump connection is not considered as a warranty matter.
7. It is recommended to check controller’s settings before lightning up of the boiler.
8. Controller is equipped with two 1,25 A fuses
15