Orion Sentry HP, Быстрый старт

Страница: 8 / 12

Bulletin #: V113018-04
Issue Date: November 30, 2018
Orion Packaging Systems * A division of Pro Mach
4750 County Road 13 NE Alexandria, MN 56308
(800) 333-6556
http://www.orionpackaging.com/parts-and-service/manuals/
Page 8 of 12
Sentry HP/LP
Quick Start Guide
Running a Test Load
Now that you have the machine unloaded, unpacked, the film is loaded, you’ve jogged all components,
and a load is ready to wrap, let’s run a test wrap.

Go to the Run Screen.

Attach the film tail to the load.

Release the E-stop button.

Press the Start button once to reset control power.

Toggle to Low Speed Mode (Turtle) on the Run Screen.

If everything is clear and you are ready to run, press and hold the Start button for the amount of time
set in the machine settings to start the machine.

Allow the load to wrap.

Since you still have control power present, you may toggle to High Speed Mode (Rabbit), then press
Start Cycle on the HMI to wrap the load again in high speed mode.

When the carriage is half way up the load, press Reinforce. The number of reinforce wraps set on the
HMI will be applied then the load will continue its cycle.

The Stop Cycle button will stop the current wrap cycle. When stopped the button changes states to
“Reset Faults.” Press Reset Faults to reset any active faults.
Illustration 8 – Main Screen