© 2007 ORION Technology LTD. All rights reserved.
7/40
‐
Use the command
$Actgetpos,1234,0000&
to double check if the mileage
value has been properly entered. The mileage value within the returned
LGPS message must be correct in order to deem the ATR configuration
successful.
Note: $ActGetPos return message will display not only the mileage value but
also the speed, RPM, and coolant temperature as well. Make sure all the
OBD values are correct when the vehicle is stationary before allowing the
vehicle to begin its trip.
Example of $LGPS return message:
$LGPS,120,261011092752,A,12131.0365,E,2502.9594,N,7,27,216,37.0,
100
0.0,6308,79C
,
8,0,111026092753&
1000.0 = Mileage input
6308 = RPM
79C = Coolant temperature value
‐
Once all the configuration steps are completed, OBDtrac Dongle will begin
tracking and sending position event reports along with the predefined
OBDII information.
