6
Installation and User’s Guide
http://www.orionimages.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310
pg6
5. NAMES OF PARTS AND FUNCTIONS
①
C-MOUNT RING
This can be removed when used with CS-Mount lens.
②
LENS FLANGE BACK FOCUS SCREW
To be used to adjust the lens flange back focal distance (distance between lens mounting
edge and image focal point), if the camera fails to come into focus with the lens focus ring,
this can be used for re-adjustment of lens back focus using a hex driver attached.
③
LENS MOUNT (CS MOUNT)
This is used to mount the lens on the camera. Many types of CS mount lens can be
used.
These holes are used to install and fix the camera on the camera mounting or bracket.
Those can be also applicable to normal use tripods which have a quarter inch thread. This
mount located on the bottom and top of the camera.
④
CAMERA MOUNT SCREW HOLES
The switch has two positions, for a video controlled auto-iris lens or a DC auto-iris lens.
⑤
LENS IRIS CONTROL SELECTOR SWITCH
Specifically used to connect the auto iris lens.
NOTE:
To use these holes to attach the camera on a tripod or other mount, make sure you
use suitable size mounting bolts as follows (1/4” -20UNC), they should not be
longer than 5.5mm to avoid an un-stable installation.
⑥
AUTO IRIS LENS CONNECTOR
Top View
Rear View
