10
Installation and User’s Guide
http://www.orionimages.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310
pg10
z
CVBS-Ratio
Aspect ratio of NTSC or PAL can be selected in either 16:9 or 4:3.
z
COLOR BAR
When it is turned ON, SMPTE COLOR BAR signal can be displayed thru the video output
connector
⑫
.
z
SHADING DET
This is for shading correction. When you see the difference of illumination on the display area,
turn ON to start a scan and save when it’s completed.
z
DEFECT DET
This is to compensate dead pixels of C-MOS sensor. Before running this DEFECT DET, AGC
value has to run at 3 or 4 LEVEL. After DEFECT DET IS ON, Press RIGHT key (R) to start a
z
RETURN
Press ENTER key (E) to exit and return to previous menu.
(2) LENS :
Select DC / Video / manual lens iris.
z
MODE
This has three positions:
DC- For a DC auto iris lens
VIDEO- For a video controlled auto iris
MANUAL- For a manual iris lens
z
RETURN
Press ENTER key (E) to exit and return to previous menu.
(3) SHUTTER / AGC :
Select Auto/Manual Shutter and adjust AGC
z
SHUTTER
AUTO- To set in Auto Shutter Mode
MANUAL- To set manual shutter speed in the value of
1/30, 1/60, 1/120, 1/250, 1/700/ 1/1000,
1/1600, 1/2500, 1/5000, 1/7000, 1/10000, or
1/30000 sec when the object is moving fast,
select smaller value of the shutter speed to
capture the object clearly.
z
AGC
This is Auto Gain Control. Gain Level can be adjusted in
a range of 0 to 20.
z
DSS
This is for Digital Slow Shutter. You can select off, x2, x3 or x4 mode. Larger number causes in
brighter image, but slower the moving object.
z
RETURN
Press ENTER key (E) to exit and return to previous menu.
z
FREQ
Select 60Hz or 50Hz.
