13
Installation and User’s Guide
http://www.orionimages.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310
pg13
(6) WDR / BLC / DNR :
Wide Dynamic (WDR) or Backlight Compensation (BLC) &
Digital Noise Reduction (DNR) level can be selected.
z
MODE
This is to modify intensity of WDR and SDI out FFS goes
down to 15 from 30.
*Note: This function does not work for CVBS output. Also does
not operate on SHUTTER MANUAL MODE.
z
WDR_WGT
This is to increase the level of WDR from range of 0 to 4.
z
BLC OSD
This is to activate the BLC position and BLC size.
z
BLC POS-X
This is to position the BLC area horizontally. The setting
of range is from 0 to 20.
z
BLC POS-Y
This is to position the BLC area vertically. The setting of range is from 0 to 20.
z
BLC SIZ-X
This is to increase the size of BLC area horizontally. The setting of range is from 0 to 20.
z
BLC SIZ-Y
This is to increase the size of BLC area vertically. The setting of range is from 0 to 20.
z
DNR (Digital Noise Reduction)
This can be selected In either LOW, MIDDLE or HIGH to reduce noise digitally.
z
RETURN
Press (E) button to go back previous menu.
(7) DAY & NIGHT :
AUTO / COLOR / B&W / OFF can be selected.
z
MODE
When MODE is AUTO, the following menu is displayed.
AGC THRS:
This is for AGC threshold. Set up
DAY & NIGHT boundary line of
current AGC setting level.
MARGIN:
Set up range of Night threshold
and Day threshold standard of
AGC THRS boundary line.
