OR-7004DV User’s Manual
31
2-4. RECORD
Under Record menu, Record configuration options for Storage, Record
,
Archive,
and Record Tools
can be selected.
2-4-1. MENU > RECORD > Storage
In Storage, it displays the installed/connected
storage status such as Capacity, Type, Usage
and Status.
Format
: Press Format to format selected HDD.
Record
: Displays the recording period and
data stored on HDD.
Detail
: Displays the detail information of data
stored on HDD
Note
: The unit will start and record
automatically when turn on the ignition if it is installed properly. It will take about 20-30
seconds for the boot up and start recording based on the pre set up options.
If the temperature below -0°C (32°F), the unit will start recording after HDD is heat up by our
built in heating sensor. If SD card is installed with HDD. It will start recording on SD Card while
HDD is being heat up. Once HDD is ready to record the data, it will stop the recording on SD
and automatically starts recording data on HDD.
Note
: Any changes or mis-installation of HDDs will stop mirroring and turn the system into
recording only mode.
Archive
: Displays the Archiving period and
data stored on HDD.
In S.M.A.R.T, HDD status are being displayed
including its temeprature. Click Update to get
the latest status.
Mirroring allows recording data on two HDDs
simultaneously. This will prevents unexpected
Содержание OR-7004DV
Страница 41: ...OR 7004DV User s Manual 40 ...
Страница 48: ...OR 7004DV User s Manual 47 ...
Страница 61: ...OR 7004DV User s Manual 60 ...
Страница 80: ...OR 7004DV User s Manual 79 Note Web is supported only on Internet Explorer 7 0 or above ...