ORiNOCO BG-2000, Руководство пользователя

Страница: 42 / 128

Basic Settings
5-12
Local Network Settings
Use this screen to enable DHCP (Dynamic Host Configuration Protocol) to
automatically assign an IP address for every computer on your LAN.
■
DHCP with NAT:
You may choose to share a single IP address using DHCP and NAT
(Network Address Translation), which assigns “dummy” IP addresses to
all machines on your private network. This allows your private network
to hide behind a single public address. Any request made from the
private network has their “dummy” IP address replaced with the public
IP Address of the BG-2100. Only this IP address is visible from the
public network.
— LAN IP Address: 192.168.253.1
— Subnet Mask: 255.255.255.0
This IP address is an example of one that can be used to configure your
BG-2000. Your ISP may require you to use a different IP address and
subnet mask.
■ DHCP only:
Share a range of IP addresses using only DHCP. Select the range of IP
addresses you wish to use (Starting IP address and Ending address)
and type in the duration that these values are valid.
■
Lease Time - indicates the time for your PC Card to retain the
assigned IP addresses. DHCP automatically renews IP addresses
without client notification.