ORiNOCO BG-2000, Руководство пользователя

Страница: 16 / 128

Hardware Description
2-8
a. Open a DOS command window. (For Windows NT/2K/XP users:
click Start - Run and type cmd in the “Open” field, and then click
OK. For all other Window users, type command in the “Open” field,
and then click OK.
b. At the prompt, type: ipconfig
c. Hit Enter.
d. Verify that your Default Gateway equals 192.168.253.1 to continue
with the next step. If this is not the case, your computer is not in the
same subnet as your BG-2000.
3. At the DOS command prompt, type:
tftp -i 192.168.253.1 put <filename of downloaded software>
FIRMWARE
4. Wait until the file is loaded and the command prompt returns with
“Transfer successful”.
5. Perform a Revert to Last Known Good Configuration of your
BG-2000 for these changes to take effect.
6. Verify that the software version/configuration you have just loaded is the
expected result. The software version can be viewed on the Statistics
page of the Management Tool. If using the BG-2000 CD-ROM to reload
your software, you should now upgrade to the latest software available
from your vendor.