ORiNG TRGPS-9084TG-M12X-BP2-MV Скачать руководство пользователя страница 157

Страница: 157 / 197

TRGPS-9084TG-M12X-BP2-MV User

Manual

ORing Industrial Networking Corp

156

Dead Time

The dead time, which can be set to a number between 0 and

3600 seconds, is the period during which the switch will not

send new requests to a server that has failed to respond to a

previous request. This will stop the switch from continually trying

to contact a server that it has already determined as dead.

Setting the dead time to a value greater than 0 (zero) will enable

this feature, but only if more than one server has been

configured.

NAS-IP-Address

Indicates the identifying IP Address of the NAS which is

requesting authentication of the user, and SHOULD be unique

to the NAS within the scope of the RADIUS server.

NAS-ID

Network Access Server identifier (NAS-ID) for the interface. The

NAS-ID is sent to the RADIUS server by the controller (as a

RADIUS client) using the authentication request, which is used

to classify users to different groups. You can enter up to 32

alphanumeric characters.

Delete

Click to delete an entry from the table.

Hostname

Specifies the host name of the RADIUS server. The

maximum supported length for the AAA RADIUS hostname is

40 characters.

Auth Port

The authentication port which specifies the UDP port used to

connect the RADIUS server for authentication. The default is

1812.

Acct Port

The UDP port to use on the RADIUS accounting server. If the

port is set to 0 (zero), the default port (1813) is used on the

RADIUS accounting server.

Key

The shared secret between the switch and the RADIUS

server.

Timeout

The time to wait for the RADIUS server to respond.

Retransmit

The number of times the switch tries to connect to a RADIUS

server.

6.8.6

Содержание TRGPS-9084TG-M12X-BP2-MV






































































































































































































Результаты поиска

Содержание TRGPS-9084TG-M12X-BP2-MV

Отзывы:

Бренды по названию

Популярные бренды

ORiNG TRGPS-9084TG-M12X-BP2-MV, Руководство пользователя

Результаты поиска

Содержание TRGPS-9084TG-M12X-BP2-MV

Отзывы:

Бренды по названию

Популярные бренды