TES-3082GT-M12-BP1 User’s Manual
ORing Industrial Networking Corp
84
6.3
Commands Set List—Port Commands Set
Commands
Level Description
Example
interface
fastEthernet
[Portid]
G
Choose the port
for modification.
switch(config)#interface
fastEthernet 2
duplex
[full | half]
I
Use the duplex
configuration
command to
specify the duplex
mode of operation
for Fast Ethernet.
switch(config)#interface
fastEthernet 2
switch(config-if)#duplex full
speed
[10|100|1000|auto]
I
Use the speed
configuration
command to
specify the speed
mode of operation
for Fast Ethernet.,
the speed can’t be
set to 1000 if the
port isn’t a giga
port..
switch(config)#interface
fastEthernet 2
switch(config-if)#speed 100
flowcontrol mode
[Symmetric|Asymm
etric]
I
Use the
flowcontrol
configuration
command on
Ethernet ports to
control traffic
rates during
congestion.
switch(config)#interface
fastEthernet 2
switch(config-if)#flowcontrol
mode Asymmetric
no flowcontrol
I
Disable flow
control of
interface
switch(config-if)#no flowcontrol
security enable
I
Enable security of
interface
switch(config)#interface
fastEthernet 2
switch(config-if)#security
enable