IES-2060 & IES-242FX-MM/SS SERIES User Manual
ORing Industrial Networking Corp
23
Forwarding Delay Time
(4-30)
The number of seconds a port waits before changing from its Rapid
Spanning-Tree Protocol learning and listening states to the forwarding
state. Enter a value between 4 through 30.
Path Cost (1-200000000)
The cost of the path to the other bridge from this transmitting bridge
at the specified port. Enter a number 1 through 200000000.
Priority (0-240)
Decide which port should be blocked by priority in LAN. Enter a
number 0 through 240. The value of priority must be the multiple of
16
Admin P2P
Some of the rapid state transactions that are possible within RSTP are
dependent upon whether the port concerned can only be connected to
exactly one other bridge (i.e. It is served by a point-to-point LAN
segment), or it can be connected to two or more bridges (i.e. It is
served by a shared medium LAN segment). This function allows the
P2P status of the link to be manipulated administratively. True means
P2P enabling. False means P2P disabling.
Admin Edge
The port is directly connected to end stations, and it cannot create
bridging loop in the network. To configure the port as an edge port,
set the port to “
True
”.
Admin Non STP
The port includes the STP mathematic calculation.
True
is not
including STP mathematic calculation.
False
is including the STP
mathematic calculation.
Apply
Click “
Apply
” to activate the configurations.
NOTE:
Follow the rule to configure the MAX Age, Hello Time, and Forward Delay Time:
2 x (Forward Delay Time value –
1) ≥ Max Age value ≥ 2 x (Hello Time value +1)
RSTP Information
Show RSTP algorithm result at this table.
