IES-2060 & IES-242FX-MM/SS SERIES User Manual
ORing Industrial Networking Corp
13
Label
Description
User name
Key in the new username (The default is “
admin
”)
New Password
Key in the new password (The default is “
admin
”)
Confirm password
Re-type the new password.
Apply
Click “
Apply
” to activate the configurations.
5.1.2.3
IP configuration
You can configure the IP Settings and DHCP client function through IP configuration.
IP Configuration interface
The following table describes the labels in this screen.
Label
Description
DHCP Client
To enable or disable the DHCP client function. When DHCP client
function is enabling, the switch will assign the IP address from the
network DHCP server. The default IP address will be replaced by the
IP address which the DHCP server has assigned. After clicking
“
Apply
” button, a popup dialog will show up to inform you when the
DHCP client is enabling. The current IP will lose and you should find
the new IP on the DHCP server.
IP Address
Assign the IP address that the network is using. If DHCP client
function is enabling, you do not need to assign the IP address. The
network DHCP server will assign the IP address for the switch and it will
be displayed in this column. The default IP is 192.168.10.1