9
If your oven is adjusted for use on NG there is no need for an adapter
at the end of the hose. Every change the pipe for the connection gas,
ensure that leak proofing between on the surface of the connection
should be placed to the seal (2).This seal is only single-used
LPG
NG
Figure–8
IMPORTANT WARNINGS
1.
Pay attention to minimum health and safety requirements.
2.
You can see technical details for your oven on an adhesive label
on the back of the oven also you will find your ovens production
information about gas type ( LPG or NG)
3.
Since the plug of your oven has earthing system, ensure using
socket with earth system. If it is used without earth system, the
manufacturer is not responsible for any loss which may arise.
4.
Keep the gas hose and electrical cable of your oven away from the
hot areas; do not let them touch the appliance. Keep them away
from sharp sides and heated surfaces
5.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid hazards. (see
Electrical Connection and Security
page 5)
6.
Ensure that the appliance is switched off before replacing the lamp
to avoid the possibility of electric shock.
7.
Connect your appliance with a valve with 30 mbar output
pressures for LPG gas and with 20 mbar output pressure for
Natural Gas (NG). (Your oven can operate on slightly differing
output pressures according to your countries gas and pressure
specifications)
8.
Connect your oven to LPG line in shortest way and without any
leakage.
9.
If the appliance is for use on LPG it must not be fitted below
ground level, i.e. in a basement.
The manufacturer declines any liability should
these safety measures not be observed.
