ORILUX EL 011972, Руководство пользователя

Страница: 42 / 76

41
UP-ALLOW Set required temperature
LED screen Display temperature and machine failure code
1
．
Operation Display
A. The display shows Temperature of the swimming pool water when the
machine is on.
2
．
Water temperature setting
A
．
Available no matter the machine is on or off;
B
．
Press the key or to set water temperature. The controller indicates
twinkling temp. Press or to adjust to your required water temp;
B. 5 seconds later, the controller display will back to the normal mode.
C. When you want to check setting temperature, press or to see the
current setting.
VII. Testing
1
．
Inspection before use
A
．
Check installation of the whole machine and the pipe connections according to
the pipe connecting drawing;
B
．
Check the electric wiring according to the electric wiring diagram; and earthing
connection;
C
．
Make sure that the main machine power switch is off;
D
．
Check the temperature setting;
E
．
Check the air inlet and outlet.
2
．
Trial
A
．
The user must “Start the Pump before the Machine, And Turn off the Machine
before the Pump”, or the machine will be damaged;
B
．
The user should start the pump, check for any leakage of water; and then set